By box unit
Polyurethane dispersion based paint that creates a “cement” effect finish. Particularly useful to touch-up cement coatings or renders. Can be applied to a wide range of building surfaces: wood, cement, plastic.
This product is no longer in stock
|Packaging||Box of 12 cans|
|Product type||Maintenance product|
|Application domain||Preparion of the supports|
|Application area||Concrete, Plaster, ...|
DANGEROUS. FOLLOW THE PRECAUTIONS.
Binders: polyurethane dispersion
Propellant: dimethyl ether
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with one pictogram.
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
The surface must be clean, dry and free of grease. Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas. Shake from time to time during use. Spray at a distance of approximately 25 to 30 centimetres from the surface. Paint can be applied in a thin or thick coat according to the touch-up work required. Apply at a temperature between 10°C and 30°C. The viscosity of the paint varies according to temperature and the texture may thicken at temperatures below 10°C.