TRACING SPORT line marking paint for grass

Line marking paint for grass

By box unit

TRACING SPORT AND GRASS paint is a line marker specifically designed for multisport grass sports fields. TRACING® Sport is available in a 750ml (net volume) aerosol and meets the highest standards for quality marking. This grass paint is applied using a marking machine specifically designed for grass sports fields.

More details

86,70 €

Volume discounts

Quantity (by box unit) Discount You Save
10 20,10 € Up to 201,00 €

Data sheet

Packaging Box of 6 cans
Volume 750 ml
Product type Line marking spray paint
Application domain Line marking, Sport field line marking, Ground signage, Signalling and events
Application area Grass, ...

Download

More info


TRACING® SPORT : THE LINE MARKING PAINT DESIGNED FOR MULTISPORT GRASS SPORTS FIELDS

 

 

Properties of the TRACING SPORT line marking paint for grass

 

  • Crisp and precise marking thanks to its purpose-designed nozzle
  • Rapid drying (15-20 min)
  • Excellent coverage
  • Specially-designed formulation that will not damage the grass
  • Weatherproof for long-term marking
  • Temperature of use: +5° to 50°C

 

Line width 4 cm to 10 cm 1 x 750 ml aerosol
coat coats
Slow application 75 m 35 m
Rapid application 110 m 55 m

 

Specifications of the TRACING SPORT line marking spray paint

 

Composition

Binder: acrylic
Pigments: mineral and organic, free from lead and cadmium
Solvents: a complex blend free from chlorinated solvents and aromatic compounds (toluene, xylene, etc)
Propellant: a specific mix of isobutane and propane

Application method

Manually or using our application equipment (line marking equipmentmarking paint gun, see bellow)
Drying Time: 15 to 20 min

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
CLP labelling with a single pictogram.

picto inflammable

 

Recommendation for use

 

  • Use head down, adjust the position of the aerosol in the equipment used to give an application height that produces the desired line width.
  • BEFORE USE: Shake the can vigorously in an upside down position to thoroughly mix the paint, continue shaking even after having clearly heard the ball bearings.
  • AFTER USE: Purge head up (until gas only comes out) to clean the valve and nozzle.

 

General conditions for use

 

For a good quality line, the first coat should be applied quickly (print layer); however the second and optional third coats should be applied more slowly to obtain the desired coverage.
For maximum visibility, a 2-coat application (with a rapid first application) is recommended.
Marking applied to wet or damp grass will have a shorter life.
Whenever possible apply to dry ground.


Associated products