Rust Convertor

Rust stabilizer / primer

By box unit

The Soppec Colors rust converter is a “two-in-one” product, stabilising the rust and acting as a primer. Ideal for restoring rusted areas of paintwork on machinery, vehicles or other metal equipment: fencing, chassis, etc. Thanks to its deep penetration, it forms a high quality protective film, making this an effective and long-lasting treatment.

More details

115,20 € tax incl.


Data sheet

Packaging Box of 12 cans
Volume 500 ml
Product type Maintenance product
Application domain Maintenance, Surface maintenance
Application area Metal, ...

Download

More info


Properties of the Rust Convertor

 

  • Application temperature: max 80°C, peak 150°C
  • Dust dry after approximately 30 minutes
  • Leave to dry for 5 hours between coats (Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)
  • Vapour pressure at 20°C: 4 bar
  • pH: 4 - 4.5
  • Spray flow: 0.8 g/sec.

 

DANGEROUS. FOLLOW THE PRECAUTIONS.

 

Specifications of the Rust Convertor 

 

Composition
Binders: blend of polyvinyl butyral, resins and solvents, free from heavy metals and mineral acids
Colour: clear brown liquid, on metal it turns dark blue/black once dry
Propellant: dimethyl ether

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with four pictograms.

DANGER

ACETONE
XYLENE
N-BUTANOL
PHENOL, 4,4'(1-METHYLETHYIDENE)BIS-POLYMER WITH 2,2'-[(1-METHYLETHYLIDENE)BIS(4,1-PHENYLENE OXYMETHYLENE)]BIS[OXIRANE]
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H336 May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated exposure (if inhaled).

picto inflammablepicto dangereux

 

Instructions for use

 

  • Shake thoroughly before use.
  • Remove any paint and rust residues with a metal brush or sander. The surface must be clean, dry and free of grease. When using outdoors, remove any moss or algae present on the surface. Cover the surrounding areas.
  • Spray at a distance of 25 cm from the surface.
  • Apply several light coats (+/- 4 coats).
  • Leave to dry for approximately 20 minutes between coats.
  • Once the final coat is completely dry, it is recommended to sand the surface to improve adhesion.