By box unit
The DITYBOX is a box / container for the DITYSPRAY system. It is highly secure and totally hermetic once charged with air. It offers a very high resistance to shocks or high pressures and guarantees daily use (reusable up to 5000 times). Its air supply valve located under the housing can be connected to any type of air network.
This product is no longer in stock
|Packaging||1 per box|
|Product type||Technical product, DITYSPRAY System|
|Application domain||Maintenance, Surface maintenance, Surfaces cleaning, Complementary products, Preparion of the supports|
The DITYSPRAY refillable spray can system is a real revolution and alternative to the classic aerosol. Today, this system is the only air conditioning solution that uses compressed air as a propulsion force in a rechargeable and transparent case ! It is ideal for confined or high-risk working environments and allows all kinds of products to be applied while respecting people and the environment.
Approved transparent TR90 housing that is shock- and wear-resistant, and reusable. DITYBOX is the receptacle for DITYBAGS. DITYBOX has a valve
at its base for compressed air supply. The product is propelled by the compressed air pressure on the DITYBAG. A screw-tightening ring is used to seal the system.
In normal use, DITYBOX is designed to operate at a maximum pressure of 8 bar at temperatures between -5°C and +60°C. These pressure and temperature limits must not be exceeded. Overpressure of the DITYBOX (exceeding 8 bar) or exposure to extreme temperatures (below-5°C or above 60°C) may present risks for the user.
You can learn more about the strength of the DITYBOX by reading our section on DITYSPRAY system tests.
shelter from the cold, sunlight and rain.
avoid shocks to the DITYBOX.
|1) Screw out the empty DITYBOX cap.|
|2) Screw out the DITYBAG cap and fill it into DITYBOX.|
|3) Screw in cap onto Ditybox to make airtight the system.|
|4) Match the connection of the inflating valve of DITYBOX to a compressed air network or on the compressor and supply it with air until a pressure of 5 bar is reached.|
|5) Spray your product.|
|6) Empty the remaining air by pressing the DITYBOX’s inflation valve or by connecting it to the deflation tip of your compressor.|
|7) Screw out the cap of DITYBOX.|
|8) Take out DITYBAG and close the cap.|
|9) Screw in the cap on DITYBOX.|