Dissolvant colle et bitume View larger

Glue and bitumen remover

Residues remover

By box unit

Designed to rapidly and safely remove residues of glue, polyurethane, tar, mastic, oil, Tectyl and glue, or any other sticky substances. Is also ideal for removing grease or resin and for cleaning tools. Non-corrosive and leaves no residue after use.

More details


Data sheet

Volume 500 ml
Packaging 12 per box
Product type Cleaner, Technical product
Application domain Surfaces cleaning
Application area Concrete, Woods, Metal, ...

Download

More info


Specifications of the Glue and bitumen remover

 

  • Packaging: 500 ml
  • Composition: blend of D-Limonene from orange oil, surface-active agents
  • Appearance: colourless clear liquid
  • Propellant: propane-butane
  • VOC-EU g/l: 656 g/l
  • Relative density (20°C g/ml): 0.690
  • Vapour pressure at 20°C: 2.2 - 2.8 bar
  • Spray flow: 0.9 g/sec

 

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with three pictograms.

DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H410 Very toxic to aquatic life with long lasting effects.

picto inflammablepicto dangereux

 

Instructions of use of the Glue and bitumen remover

 

Shake thoroughly before use. Do not use at temperatures below 10°C. Do not use outside if there is a risk of rain or frost, or in full sun. Spray the solvent cleaner onto the surface to be cleaned. Leave to act for several minutes then remove with a cloth. If marks still remain, repeat until the desired result is obtained. Do not use on rubber or polystyrene. Before using, carry out a test on a small unobtrusive area of the surface to be cleaned to verify product compatibility. Will not remove hardened paint, polyurethane coatings and similar.