Nettoyant carburateur View larger

Carburetor cleaner spray

Fuel system cleaner

By box unit

A powerful and effective carburetor cleaner spray, useful for the regular maintenance of agricultural and construction site machinery pistons and injectors, it eliminates grease, carbon, resin, rubber and oxidation deposits. This product is non-corrosive with an excellent capacity to dissolve deposit build-up without leaving a residue, for optimal carburettor functioning after cleaning.

More details


Data sheet

Volume 500 ml
Packaging 12 per box
Product type Cleaner, Technical product
Application domain Surfaces cleaning
Application area Metal, ...

Download

More info


The carburetor cleaner spray can be used on valves, actuators, injectors, stationary regulation motors, accelerators and air intake assemblies. 

 

Specifications of the Carburetor cleaner spray

 

  • Packaging: 500 ml
  • Composition: blend of aromatic and aliphatic hydrocarbons, ketones and alcohols
  • Appearance: colourless clear liquid
  • Propellant: propane-butane
  • VOC-EU g/l: 745 g/l
  • Relative density (20°C g/ml): 0.745
  • Vapour pressure at 20°C: 3.2 - 3.6 bar
  • Spray flow: 3.1 g/sec

 

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with three pictograms.

DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated exposure (if inhaled).
H412 Harmful to aquatic life with long lasting effects.

picto inflammablepicto dangereux

 

Instructions of use of the Carburetor cleaner spray

 

The PRO TECH fuel system cleaner contains an inflammable solvent; only use on a cold engine. Before treating, cover electrical conductors and switch off electrical systems. Evenly spray the component parts requiring treatment and any to be disassembled; leave to act for only a few minutes. For very dirty areas, leave to act for approximately 5-10 minutes. Brush to remove encrusted dirt. Air dry conductive components after cleaning. Warning: the product is not designed for use on diesel engines!