Contact cleaner spray

Dry contact cleaner

By box unit

Our contact cleaner spray is a rapid, powerful and effective cleaner for all electric and electronic components such as those found in integrated circuits, industrial control panels, electrical cabinets, etc. The product has low surface tension and eliminates effictively greases and dirt. It evaporates completely leaving no residue. It is a non-corrosive product that does not act as a conductor.

More details

76,80 €


Data sheet

Packaging12 per box
Volume500 ml
Product typeCleaner, Technical product
Application domainSurfaces cleaning
Application areaPlastic, ...

Download

More info


Specifications of the Contact cleaner spray

 

  • Packaging: 500 ml
  • Composition: blend of aliphatic hydrocarbons and alcohols
  • Appearance: clear liquid
  • Propellant: CO2
  • VOC - CH%: 96%
  • VOC-EU g/l: 725 g/l
  • Relative density (20°C g/ml): 0.758
  • Vapour pressure at 20°C: 5.0 - 5.5 bar
  • Spray flow: +/-3.5 g/sec

 

DANGEROUS. FOLLOW THE PRECAUTIONS.

 

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with three pictograms.

DANGER

HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <5%% N-HEXANE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

picto inflammablepicto dangereux

 

Instructions of use of the Contact cleaner spray

 

Shake well before use. Always ensure that electronic equipment has been unplugged or switched off before applying. Point the aerosol at the surface to be cleaned and spray. Wait until the product has evaporated completely (+/- after 15 minutes) after treatment before switching equipment on again.